Our Cookie Policy

We use cookies, as described in our Cookies Policy, to ensure that we give you the best experience on our website.
If you continue to use our website without changing your cookie settings, you agree to our use of cookies. However, if you would like to, you can change your cookie settings at any time by following the steps set out in our Cookie Policy.

Carbon Cranks


Introducing the long-awaited carbon version of our tried-and-tested EVO cranks.

The Carbon crank has been designed to maximise the advantages of carbon fibre, through a unique construction method whilst using very small aluminium inserts to keep weight down. This, coupled with an optimised lay-up, ensures a good balance between ride feel, stiffness, and isolation from trail chatter.

Longevity and serviceability are considered in everything we do, and the Carbon crank is no exception. With a 1K outer fabric used for enhanced abrasion resistance. The crank also features replaceable pedal threads, and like the Evo cranks, its axles and chainrings are interchangeable, making it compatible with most drivetrains and frames. Covering you for the future.

Much like our HB916, Carbon Bars & Seatpost, the crank was designed, tested and manufactured in our Barnoldswick factory, showcasing our commitment to maintain the highest standards of Carbon fibre production in the UK.

Key Features

>> Tuned stiffness characteristics for optimum ride feel
>> 1K outer fabric has greater abrasion resistance and gives the unique ‘Hope’ carbon aesthetic
>> Pedal thread can be replaced if threads become damaged 
>> Foam core helps to absorb impacts and dampen vibrations
>> T700 fibres for optimum strength to weight
>> Unique carbon construction method
>> Ride feel optimized lay-up and construction
>> Proven self-extracting axle/arm interface from our EVO cranks
>> 155, 165 & 170mm length
>> 30mm oversize 7075 aluminium alloy axle
>> 7075 aluminium inserts
>> Hardware available in black, blue, red, silver, purple and orange
>> Axle lengths to suit 52mm(boost) and 55mm chainlines, interchangeable for different bikes
>> Different q-factor and chainline combinations are possible by interchanging axle length and chainring offset to help with frame/drivetrain compatibility
>> Weight for L155: 422g w/o chainring, 487g with 32t chainring
>> Direct mount chainring only, Spiderless Retainer chainrings 28T to 36T
>> Q‐Factor 168mm Boost/176mm 55mm
>> Designed, tested and manufactured in Barnoldswick, UK
>> Recommended use Trail/All mountain


£550.00 / € 690.00/ $695.00
Available at Hope Dealers from April 15th